2U DVB-T/T2 Transmitter TV-50D Datasheet
General data
Operating frequency range UHF 470 – 862 MHz or VHF 170 – 230 MHz, setting in 1 Hz steps
Bandwidth 6,7,8 MHz
Output power 50 Wrms ± 0.5 dB
Output connector N female, 50 ohm
Supporting standards EN 302 755, TS 102 831, NS 102 773 (T2-MI)
TS Input interface 2 x ASI T2-MI, BNC 75 ohm
2 x ASI TS, BNC 75 ohm (mode A option)
2 x TsoIP 1Gb, RG45 (TSoIP option)
ASI monitor BNC female 75 ohm
GNSS antenna input 1 x GNSS antenna, TNC 50 ohm, user selectable DC bias
integrated multi standard receiver (GNSS option)
External SFN timing:
1pps input BNC female 50 ohm, 0-5V
1pps output BNC female, 0-1.5V @ 50 ohm load
10MHz input BNC female, 100mVpp – 3Vpp, user selectable impedance
10MHz output BNC female, 800mVpp @ 50 ohm load
Control and settings on front panel and remotely
Control Interface 1 x RJ45 in front panel + 2 x RJ45 in rear panel
1 x RS-232
1 x RS-485 for external amplifiers
Remote control RS232, Ethernet (WEB and SNMP)
WEB GUI control for use with standard Web Browser.
MER ≥ 35 dB
Operating condition:
Temperature range +5 … +45 °C
Humidity 80% non condensing
AC power supply ~220 V +10/-15% ; 50 ± 2 Hz
Power consumption 400 VA max
Cooling forced air
Dimension 2U 19” (88.1х482.6х405mm)
Weight 11 kg
Options
Digital adaptive pre-corrector (DAP option)
Integrated Multi Standard Global Navigation Satellite System (GNSS option) GPS and GLONASS support
Mode A supported “legacy” TS input for NFM single PLP only (mode A option)
Bandpass DTV filter