DVB-T/T2 Exciter TV-05D  Datasheet


Specifications

Operating frequency range UHF 470 – 862 MHz or VHF 170 – 230 MHz, setting in 1 Hz steps
Bandwidth 6,7,8 MHz

Output power 100 mWrms ± 0.5 dB
Output connector N female, 50 ohm

TS ASI inputs 2 x BNC female 75 ohm
Redundancy user selectable switching between primary and secondary ASI source
TSoIP inputs 2 x RJ45 1Gb (TSoIP option)

ASI monitor BNC female 75 ohm

GNSS antenna input 1 x GNSS antenna, TNC 50 ohm, user selectable DC bias
integrated multi standard receiver (GNSS option)
External SFN timing:
1pps input BNC female 50 ohm, 0-5V
1pps output BNC female, 0-1.5V @ 50 ohm load
10MHz input BNC female, 100mVpp – 3Vpp, user selectable impedance
10MHz output BNC female, 800mVpp @ 50 ohm load

Control and settings on front panel and remotely
Control Interface 1 x RJ45 in front panel + 2 x RJ45 in rear panel
1 x RS-232
1 x RS-485 for external amplifiers

Remote control RS232, Ethernet (WEB and SNMP)

Network mode MFN, SFN
Modulation QPSK, 16-QAM, 64-QAM, 256-QAM
IFFT 1K, 2K, 8K, 16K, 32K
Guard interval 1/128, 1/32, 1/16, 19/128, 1/8, 19/256, 1/4
Code Rate 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Pilot pattern PP1, PP2, PP3, PP4, PP5, PP6, PP7, PP8

MER ≥ 40 dB

Operating condition:

Temperature range +5 … +45 °C
Humidity 80% non condensing

AC power supply ~220 V +10/-15% ; 50 ± 2 Hz
Power consumption 50 VA max

Cooling forced air
Dimension 1U 19”
Weight 5 kg

Options

Digital adaptive pre-corrector (DAP option) it is a software method of pre-distorting a signal prior to feeding it into height power amplifier.
The precorrector has two feedback inputs:
• linearization of non-linear transfer characteristics
• linearization of linear transfer characteristics

Main features:
MER improvement +15dB
Shoulder improvement +16bB
Operating modes bypass, static, adaptive

Pre-corrector input connectors SMA 50 ohm
Level -10dBm to +10dBm
Return loss > 20dB

Integrated Multi Standard Global Navigation Satellite System (GNSS option) GPS and GLONASS support

Input connector TNC female
Frequency 1.575 GHz GPS / 1.602-1.603 GHz GLONASS
Antenna net gain range 0 to +32dB
Antenna passive or active (not included)
Antenna DC supply OFF, 3Vdc or 5Vdc ± 0.5V
Antenna DC current max 50mA

Mode A supported “legacy” TS input for NFM single PLP only (mode A option).

User friendly intuitive WEB GUI control for use with standard Web Browser.